STI070G Stud terminal 70sqmm grey / M8 / 192A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI070PE Stud terminal 70sqmm green / M8 / 192A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI070R Stud terminal 70sqmm red / M8 / 192A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI070S Stud terminal 70sqmm black / M8 / 192A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI095B Stud terminal 95sqmm blue / M8 / 232A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI095BN Stud terminal 95sqmm braun / M8 / 232A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI095G Stud terminal 95sqmm grey / M8 / 232A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI095PE Stud terminal 95sqmm green / M8 / 232A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI095R Stud terminal 95sqmm red / M8 / 232A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI095S Stud terminal 95sqmm black / M8 / 232A / 10Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M8 with a thightening torque of 10Nm. , eng
STI120B Stud terminal 120sqmm blue / M12 / 269A / 19Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M12 with a thightening torque of 19Nm. , eng
STI120BN Stud terminal 120sqmm braun / M12 / 269A / 19Nm
To connect large currents, the isolated stud terminals offer space for high conductor cross sections. The terminals are used in applications of cabinet building and in combination with driving motors for high currents and with a maximum operating voltage of 1,000 V. Easy mounting on DIN rails facilitate installation. Depending on the conductor cross-section, it is possible to attach up to four conductors with a cable lug to the threaded bolt using a hexagon screw. The screw connection creates an optimum connection between the clamping body and the cable lug and ensures a secure application, even in a vibrating environment. The stud terminals can be stringed together by copper bridges with two holes. To do this, break out the housing at the pre-marked points. The terminals are manufactured according to the DIN EN 60947-7-1 standard. The material of the U-profile is PA6.
The hexagonal screw is M12 with a thightening torque of 19Nm. , eng
