Реле прихованого монтажу

Flush-mounted DCS switching actuator – Flush-mounted switching actuator for controlling an external gong or other device using the Gira door communication bus. – Actuation of a zero-voltage switching contact (24 V SELV/ 50 µA to 1.6 A AC/DC) via the 2-wire bus. – The flush-mounted switching actuator can be actuated by:the “Door” and “Light” buttons on the home station,the floor-call button on the home station,the call button on the door station, the call button on the home station,a zero-voltage button (in combination with the DCS button interface, 2-gang). – The flush-mounted switching actuator can be used in four different operating modes: switching, timer/sec., timer/min., and pulse. – Impulse function for controlling existing automatic staircase mechanisms. – Switching time can be adjusted progressively from 1 to 10 s or 1 to 10 min., depending on the function set. – LED display for programming, function selection, and time setting. The flush-mounted switching actuator is intended for installation in a deep device box (60 mm deep) behind a DSC bus coupler.